AIM-8 Compare

Main features:

  • Freely chosen interfaces: up to 3 interfaces.
  • Suppoerted interfaces: RS485, RS232, USB and LAN.
  • Analog inputs: up to 8 devices.
  • Supported analog channal types: voltage, current, resistance.
  • Supported protocols: Modbus RTU, Modbus TCP/IP, IP, ICMP, UDP, TCP, DHCP, PPP, ARP, SNTP, IEC60870-5-104:200.
  • Power: 9-36 VDC (10VA)

Description
Specification
Downloads

OVERVIEW

AIM-8 controller is created for data logging and analyzing of Analog channels in a real time. Controller supports Current, Voltage and Resistance inputs and can be used as standalone device or as extension module (up to 8 Analog IN channels) for other controllers, like MPC-374, MPC-330 and etc.. Using RS232, RS485 or Ethernet, controller sends saved data and reports to remote users.

Controller supports basic interfaces (Discrete inputs, RS232, RS485, Ethernet and USB) and wide range of protocols (and can be extended by our programmers, if you need some special). For data exchange over Ethernet and/or any Serial interfaces, controller uses Modbus TCP/IP, Modbus RTU, IEC60870-5-104:2000, SNTP and other protocols.
Our clients – GAS, Heat, Watering suppliers, Industry companies in EU, Ukraine, Central Asia.

DEFAULT FEATURES

  • Up to 8 Analog input ports;
  • Current, Voltage and Resistance analog IN chanals;
  • Independent data log (up to 8MB) with real time stamp;
  • Remote configuration and upgrading possibilities over Ethernet;
  • Interfaces: Ethernet, RS232, RS485, USB;
  • Galvanically isolated interfaces and power supply.

BENEFIT TO THE CLIENT

  • Economy, because controller does a lot of mechanic work, so your professionals can do more important work;
  • Increase efficiency, because the data are sent to a central computer continuously. If connection is lost, data will be safe kept in controllers memory, until connection will be reestablished;
  • Increases security, because the relevant information is rapidly shorten response time;
  • Simplicity, because of intuitive control and optimally assembled LED’s it is easy to monitor and maintain equipment;
  • A good partner, because we not only help you customize and will make equipment, but also flexibly adapt controller, if your demands will change.

Manufacturers code:

First interface (galvanically isolated)
RS485distance up to 1,2km, max 32 transivers, speed up to 19.2 Kbits/s
RS232distance up to 15m, speed up to 19,2Kbit/s
Second interface
Ethernettwisted pair, 10/100 Mbps, distance up to 100m
Third interface
USB (device)Type B, ver. 2,0
Discrete and Analog interfaces
Analogi IN8resistance, voltage or current, reading 10 times per second
Protocols
Modbus RTU
Modbus TCP/IP
IP
ICMP
UDP
TCP
DHCP
PPP
ARP
SNTP
IEC60870-5-104:2000
DynDNS
FTP server
FTP client
DNS client
General
Power9-36 VDC
Galvanic isolation>1000V
Capacity200mA max
Regulatory approvals
Electromagnetic compatibilityEN 55022:2010
EN 55024:2010
EN 61000-4-2:2009
EN 61000-4-3:2006
EN 61000-4-3:2006/A1:2008
EN 61000-4-3:2006/A2:2010
EN 61000-4-6:2009
SafetyEN 60950-1:2006+A1:2010+A11:2009+A12:2011
Specification
CPUARM7
Memoryarchive storage 1-8 MB, independant data storage without power about 5 years
LED indication
Power+
Serial ports read/write for each port+
Ethernet status+
Programing and updating
RemoteEthernet (RJ45)
LocallyUSB, RS232, RS485
Physical characteristics
Dimmensions120x101x35 mm
Weight170 g
Mounting typeon DIN32 rail
Safety classIP20
Climate conditions
Operating temperature-25..+60 °C
Storage temperature-40..+60 °C
Humidity range5-95%, non-condensing
Other fuetures
Real time clock+
24 months warranty period+

Similar devices

 




Send to friend

* - Required field
Sender's E-mail *:
Friend's E-mail *:
Message:
Sent…